Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Erwin, TN

Exterior Mold & Mildew Removal in Erwin, TN

Killing and removing mold, mildew and algae from siding, decks, walkways and fences, with treatment that slows regrowth. Typical cost $250-$700.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Exterior Mold & Mildew Removal in Erwin, TN brings it back, usually in a single visit.

The right method for the job

Soft washCleaning method

Is it time for exterior mold & mildew removal?

  • Black, green or gray spots and film
  • Slippery walkways and decks
  • Musty smell near shaded walls
  • Growth that returns soon after rinsing

Why it gets dirty

  • Shade, humidity and poor air flow
  • Organic debris and pollen
  • Surfaces that stay damp after rain or sprinklers

Easy upkeep between cleanings

  • Improve sun and air flow by trimming plants
  • Keep gutters and sprinklers from soaking walls
  • Clean small areas with an outdoor mildew cleaner, following the label

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Blasting growth off without killing it, so it grows back fast
  • Mixing cleaning chemicals, which can release toxic gas
  • Damaging plants with runoff

How we handle exterior mold & mildew removal

  1. Identify surfaces and growth
  2. Protect plants and fixtures
  3. Apply a solution that kills the growth
  4. Rinse at low pressure
  5. Post-treat where helpful to slow regrowth

This service is for outdoor surfaces. Mold inside the home, in attics or in wall cavities needs a mold remediation specialist, not a pressure washing company.

How much does exterior mold & mildew removal cost?

$250-$700Typical range for typical exterior growth on a home
2-4 hoursTypical time on site
Every 1-2 years in humid or shaded areasRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Serving Erwin, TN and nearby towns

Mildew and algae are the main reason Tennessee homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.

Spring pollen season in Tennessee coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

Red clay soil is common in parts of Tennessee. Rain splashes it onto the bottom of the siding, walls and walkways, and its iron-rich color can stain light surfaces. It usually needs a dedicated clay or rust cleaner rather than pressure alone.

Besides Erwin (ZIP code 37650), we handle exterior mold & mildew removal in Unicoi (5.1 mi), Midway (10.7 mi), Jonesborough (10.8 mi) and Johnson City (12.2 mi). Call (555) 010-0000 for a free quote in Erwin.

Exterior Mold & Mildew Removal: frequently asked questions

How much does exterior mold & mildew removal cost in Erwin, TN?

Exterior Mold & Mildew Removal typically costs $250-$700 for typical exterior growth on a home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for exterior mold & mildew removal?

Exterior Mold & Mildew Removal is done with soft wash. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.

Is exterior mold & mildew removal safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule exterior mold & mildew removal?

Every 1-2 years in humid or shaded areas. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Erwin, TN

Pressure Washing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$600

Parking Lot & Garage Cleaning

Cleaning parking garages, lots and loading areas to remove oil, grime, gum and litter.

Typical $500-$3,000

Pressure Washing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$600

Pool Deck Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $200-$500

Pre-Paint Washing

Washing siding and trim before painting or staining so new paint bonds to a clean surface.

Typical $250-$600

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Gum Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$1,000

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Rust Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$500

Soft Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$800

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Driveway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

Ready for a cleaner home or business?

Get a free pressure washing quote in Erwin, TN. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote